공장 자동화
공장 자동화는 스마트 조명과 센서 솔루션을 사용해 개방형 작업 환경에서 기능적 안전을 보장하고 현대 제조 프로세스 내에서 효율성과 제품 품질을 개선합니다. ams OSRAM은 고객이 생산 공정을 개선할 수 있도록 포괄적인 광학 솔루션 포트폴리오를 제공합니다.
×
Innovative automation solutions for production environments
ams OSRAM's optical solutions for machine vision enable precise environmental perception across various applications. In quality control, automatic optical inspection relies on the combination of imager resolution, frame rate, scanning method, shutter technology, and scene illumination to achieve high image quality. Spectrally adaptive illumination may be needed for daylight conditions.
Machine vision applications benefit from near-infrared illumination and sensitive NIR image sensors, which ensure high-performance vision systems immune to ambient light. In production environments, safety is ensured by 2D/3D LiDAR scanners or LED light curtains, which prevent accidents by detecting presence and motion.
Automatic identification and data capture (AIDC) systems, used in retail, warehousing, and distribution centers, rely on linear image sensors or 2D array imagers to read barcodes and QR codes. These systems consist of an illumination system, optical sensor, and decoder, which work together to identify objects and obtain key metrics.
Functional safety in production environments involves more than just localization and presence detection. Advanced multi-channel capacitive sensing controllers and smart proximity sensors ensure machines operate only when safe. Visual safety cues are enhanced with multi-color LEDs and innovative status indications, such as projecting patterns onto the floor or walls around equipment.
ams OSRAM offers a comprehensive range of solutions for factory automation.
×
Inspection systems
ams OSRAM offers a comprehensive range of sensors and components for various inspection systems, including machine vision, X-ray, CT-scans, and spectroscopic measures. Our solutions enhance the accuracy and reliability of optical, magnetic, electrical, and mechanical inspections.
Barcode reader
Through advanced AIDC systems, ams OSRAM ensures accurate object identification and data capture in various industries using laser or LED illumination, high-efficiency image sensors, and powerful decoders.
Factory safety
Utilizing 2D/3D LiDAR scanners, LED light curtains, and vision-based sensing products, ams OSRAM guarantees accurate object detection, presence sensing, and functional safety in modern, flexible production environments.
백서 요청
양식 로드 중...
이 백서를 다운로드하여 IR:6 LED의 전체 성능에 대해 알아보세요. 생체 인식, 보안 및 의료 솔루션, 기술 사양 및 실제 적용에 대한 최신 IR 칩 개발에 대한 심층적인 통찰을 통해 적외선 솔루션의 성능을 향상시키세요.
Your data is used only for internal purposes related to the registration process.
All fields marked with an asterisk(*) must be filled out.
추천 제품
OSRAM OSLON™ Black, SFH 4713B
OSLON Black Series (850 nm) - 80°
OSRAM OSLON™ Black, SFH 4714B
OSLON Black Series (850 nm) - 150°
ams CSG14K - 1” Global Shutter Image Sensor
With the CSG14K, ams offers a 14Mp global shutter area scan sensor, featuring 3.2μm charge domain pixels for the most demanding machine vision applications in 1” optical size.The CSG family features fast 12-bit column based ADCs to achieve industry-leading high frame rates at full resolution enabling faster inspection and higher data throughputs. Data throughput can be reduced by subsampling or binning enabling even higher frame rates. Optical black pixels are used for automatic black level calibration and row noise correction. Computation in the ISP pipeline can be streamlined by the histogram and image statistics that are calculated on-chip. Binning of pixels is possible to improve FWC, DR and SNR. HDR modes operate with dual exposure. Exposure and read-out can be externally triggered.The CSG family comes in a 218-pin LGA package with 22mm x 20mm x 3.3mm for ultra-compact(C-Mount) designs. Typical applications include 4K video, factory automation, intelligenttransportation systems (ITS) and general machine vison.
ams Dragster Line Scan
Dragster is a platform of digital line-scan sensors. The sensor family is made using three types of basic elements: a single line element from 2K to 8K pixel resolution (7 μm pixel size and pitch), a dual line element from 2K to 8K pixel resolution (7 μm pixel size and pitch) and a single line element from 4K to 16K pixel resolution (3.5 μm pixel size and pitch). The chip versions with dual line are optionally available with Bayer Pattern RGB filters placed on the sensors. The sensor features a low noise pixel with true CDS and global shutter for interleaved readout and integration operation. Start and end of integration, as well as optional start of readout, are started upon individual external trigger events. The readout is made by digital taps organized in odd/even order for each 2K segment. For each line segment, 2K (7 μm pixel) or 4K (3.5 μm pixel), all pixels are read out. For sensor versions with 3.5 μm pixel pitch, two 2K segment readout circuits are placed on each side of the pixel line, to lead to a basic segment of 4K pixels, where even pixels are read out over the bottom readout and odd pixels are read out over the top readout.
ams Mira220
2.2 MP NIR enhanced global shutter image sensor designed for 2D and 3D consumer and industrial machine vision applications. Due to its small size, configurability and high sensitivity both in visual as well as NIR, the Mira220 is well suited for 2D and 3D applications, which include Active Stereo Vision, Structured Light Vision for Robotics and AR/VR.
OSRAM OSLON™ Signal, LV CRBP.01
The OSLON™ Signal combines a compact form factor with high efficiency and electrically insulated thermal pad. The square package matches the optical center with the mechanical center. This provides easy clustering flexibility and high packing density for a maximum flux density.
The color bins are defined for best fit to most signaling norms.
ams BELAGO1.1 Dot Projector
BELAGO1.1 is a proprietary infrared dot-pattern illuminator for stereoscopic imaging and structured light platforms with eye-safety feature. It produces a focus-free, high-contrast dot pattern that algorithms can use to address low-texture situations and achieve high-accuracy depth maps. An additional benefit of the dot pattern is a reduction of the computational load required to perform the depth calculation.The BELAGO1.1 dot-pattern illuminator is provided in a miniature package that is compatible with standard lead-free reflow processes. As such, it can be successfully used onboard of a great variety of 3D sensing platforms, from mobile to IoT to robotics, both for stereoscopic imaging and structured light. BELAGO1.1 emitters project 5k dots, focus-free, in a random pattern at 940nm.
ams TMF8821 configurable 4x4 multi-zone Time-of-Flight Sensor
The TMF8821 is a direct time-of-flight (dToF) sensor in a single modular package with associated VCSEL. The dToF device is based on SPAD, TDC and histogram technology and achieves 5000 mm detection range. Due to its lens on the SPAD, it supports 3x3, 4x4 and 3x6 multizone output data and a wide, dynamically adjustable, field of view. A multi-lens-array (MLA) inside the package above the VCSEL widens up the FoI (field of illumination). All processing of the raw data is performed on-chip and the TMF8821 provides distance information together with confidence values on its I2C interface.
ams AS7343 Spectral Sensor
The AS7343 is a 14-channel highly versatile, multi-purpose spectral sensor enabling new consumer, commercial, industrial and laboratory applications. It is optimized for reflective, transmissive and emissive measurements including color matching, fluid or reagent analysis or general spectral reconstruction.The spectral response is defined by individual channels covering approximately 380 nm to 1000 nm with 12+2 channels: 12 in the visible spectrum (VIS) to near-infrared (NIR) range, a clear channel and flicker channel. Applications can be assisted by full spectral reconstruction of light and an integrated flicker detection channel that can automatically flag ambient light flicker at 50/60 Hz as well as buffer data for externally calculating other flicker frequencies. AS7343 integrates high-precision optical filters onto standard CMOS silicon via deposited interference filter technology. A built-in aperture controls the light entering the sensor array to increase accuracy. A programmable digital GPIO and LED driver enable light source and trigger/sync control. Device control and spectral data access is implemented through a serial I²C interface. The device is available in an ultra-low profile package with dimensions of 3.1 mm x 2 mm x 1 mm.
ams AS5510 Linear Position Sensor
The AS5510 is an absolute position sensor for linear applications with short strokes (0.5 to 2.0mm) based on contactless magnetic sensor technology. To measure a lateral movement the sensor needs a simple 2-pole magnet and the measured distance depends on the magnet geometry. The absolute position is measured with a resolution of 10 bit = 1024 positions and it is provided as a digital value on the serial interface (I²C).With two decades of magnetic sensor system know-how, we have broad experience in selecting the most suitable magnets. ams experts recommend the following magnet suppliers.
추천 제품군
Chip LED for industrial applications
The products are designed for optimized performance out of a very small form factor to realize state of the art solutions. The broad product portfolio addresses various areas inside applications like electronic equipment, gaming, white goods, illumination and backlighting.
EVIYOS™ for industrial applications
ams OSRAM offers with EVIYOS™ Shape an advanced μLEDbased light source that enables various illumination and projection applications with 25600 individually controllable pixels (aspect ratio of 1:4). Please note, that this product is only available as product set. The EVIYOS™ Shape LED will be delivered together with a Companion ASIC.
FIREFLY™ 0402 for industrial applications
The FIREFLY™ 0402 is designed for use in consumer applications. Due to its low height and optical characteristics it is optimized for flat indirect backlighting.
LED ENGIN LuxiGen™ for industrial applications
High Power UVA LED Portfolio for Industrial UV Curing;
LED ENGIN LuxiGen(R) UVA LED is an ideal solution for industrial UV curing, such as paint, ink, adhesive, resin and others; blacklight for entertainment and counterfeit detection. It features very high flux density in a small footprint, low thermal resistance, with narrow binning on wide wavelength range. These features allow users to create powerful compact fixtures with the ideal wavelength for their applications.
MIDLED™ for industrial applications
The MIDLED offers remarkable high radiant intensity and flexibility for designers, because its package can be used both as a toplooker and as a sidelooker.
Micro SIDELED™ for industrial applications
Flat side-emitting device ideal for compact assembly
Mini TOPLED™ for industrial applications
With its small package size, integrated reflector, homogenous and extremely wide viewing angle it is a perfect product for LCD backlighting, switches, indicators, radios etc.
Multi TOPLED™ for industrial applications
Extremely wide viewing angle, ideal for back lighting and coupling into light guides. Chips can be controlled separately, high signal efficiency possible by color change of the LED.
OSLON™ P1616 for industrial applications
The OSLON™ P1616 products are the smallest high power infrared LEDs in the product portfolio of ams OSRAM. With a package size of only 1.6 x 1.6 mm² and a best in class intensity the devices are the industry‘s smallest high power (near) infrared devices adressing different applications.
OSLON™ SX for industrial applications
The OSLON™ SX combines a compact footprint of 3x3mm² with high efficiency and an electrically insulated thermal pad. This enables tight packing density for clustering with superior heat dissipation designs. The product qualification test plan follows the guidelines for automotive grade discrete semiconductors.
OSLON™ Signal for industrial applications
OSLON™ Signal LEDs offer cutting edge signaling design solutions with a significantly reduced number of LEDs per signal. They are the perfect fit for traffic lights, aviation, marine, rail, industrial, and transportation or other signaling applications. The tiny ceramic-based high-performance package from ams OSRAM sets new standards in terms of electro-optical efficiency even at high temperatures. Available in various colors and performance classes. The next generation of OSLON™ Signal introduces a new 120° lens design for improved light extraction. Brightness and efficacy improvements are further achieved through implementation of the latest chip technologies and a reflective titanium dioxide casting. This new generation is fully compatible in footprint and solder pad design to the previous generation insuring an easy design in process for this high-performance LED.
PointLED™ for industrial applications
Unlike conventional SMT LEDs, ams OSRAM’s PointLED™ is a round component, capable of through-hole mounting. This means it doesn’t protrude above the surface of the circuit board, making it the ideal choice in all kinds of applications where space is critical. It can also be surface-mounted, making it the ultimate flexible choice of LED.
SMARTLED™ 0603 for industrial applications
SMARTLED™ 0603 – The innovative product joins the successful family of TOPLED™. Invested with the same high quality, its unique features are due to set new standards in product development and design, opening new applications on a new scale.
SYNIOS™ E4014 for industrial applications
Optimized for light guides and backlighting with narrow widths. The combination of silicone resin, volume casting and volume emitter LED chip offers a homogenous radiation pattern.
SYNIOS™ S2222 for industrial applications
Improved color variety for customer-specific lighting solutions for electronic devices using RGBW modules, interior lighting for passenger cabins in trains or airplanes as well as high-quality architectural lighting.
TOPLED™ for industrial applications
ams OSRAM' Power TOPLED™ is a standard product in LED lighting. With our great experience in SMT LED we are able to offer a high quality product for all kind of applications. Within the spectrum of visible and invisible light the TOPLED™ product family offers solutions from backlighting up to basic gesture sensing and illumination in automotive interior applications. The latest product of this well established family ist the SFH 4246R, a new part for narrow space applications in the gesture sensing area.